Hyperscanning series part 6: Sending Wireless Triggers to Multiple Receivers

Many of you might already be using the Wireless Trigger system to facilitate experiments that are utilizing the LiveAmp’s potential as a mobile amplifier. By pairing a single transmitter with multiple receivers, you can now maximize the possibilities of such a mobile experiment by adding more LiveAmps to run hyperscanning experiments.

  • Hyperscanning series part 4: How to do hyperscanning with trigger forwarding

Hyperscanning series part 4: How to do hyperscanning with trigger forwarding

In this hyperscanning series, we first introduced our gold standard solution based on BrainAmps, then a wireless solution using CGX Quick headsets and the StimTrigger, as well as the extremely flexible LSL solution. In this fourth part, we demonstrate another hardware-based option: using the trigger mirror mode which can be used with actiCHamp Plus and LiveAmp together with the Sensor & Trigger Extension.

  • A “how-to” guide on combining Brain Products equipment for Sport Psychophysiology

A “how-to” guide on combining Brain Products equipment for Sport Psychophysiology

In this article, we provide you with an example on the “how-to” of acquiring and analysing sport psychophysiology data. Given the potential complexity of the topic, we decided to focus on the concrete example of golf putting. However, our hope is to provide you with a general idea that you can re-shape and adapt to other sport movements that are of interest to your research question.

  • Communication with the trigger port: A beginner’s guide

Communication with the trigger port: A beginner’s guide

Beginners from non-technical disciplines are often challenged when setting up their EEG experiment especially in terms of triggers/markers. If you are struggling with this topic, too, or want to learn more, check out our new “Beginner’s guide on Communication with the trigger port”.

2022-06-20T11:07:55+02:00August 24th, 2020|Categories: 2020, Issue 2/2020, Support & Tips|Tags: , , , , , |

Wireless Trigger – a fully mobile solution for recording event markers in EEG data

The new Wireless Trigger set consists of a transmitter, connected to a trigger source, and a receiver, connected to an amplifier. This solution allows you to replace a trigger cable in your experimental setup making it completely wireless and opens new exciting ways to approach your mobile EEG research.

New LiveAmp 64 – High density wireless EEG amplifier

This summer we introduced the lower channel count LiveAmp wireless amplifier systems, the LiveAmp 8 and 16. Now we are extending the line with a 64 channel version to complement the LiveAmp family. We believe the LiveAmp 64 to be the most flexible wireless high density EEG/ExG recording system. The system can be used with a wide range of innovative electrode technologies and sensors. In addition, there is an easy upgrade path all the way from 8 to 64 channels.

Go to Top