CapTrak has been updated with USB 3.0 cameras
CapTrak, our handheld electrode localization tool for actiCAP active electrodes, has been updated. This device works to detect the position of actiCAP electrodes via triangulation with two integrated cameras to give you fast, accurate and reliable localization of your actiCAP electrodes. We have recently replaced the firewire cameras with USB 3.0 cameras, as well as made improvements to the calibration checks in the CapTrak software. These updates improve the calibration and self-check procedures, allowing you an even easier and quicker procedure than before. In order to get the most out of your CapTrak experience, be sure to check out our tips on how to facilitate the acquisition process, as well as how to keep your CapTrak in good working condition.
New BrainCap to LiveAmp Adaptor
Those research groups who have traditionally been carrying out experiments in a laboratory-based setting and are interested in taking their research out of the lab and into the real world, will be happy to know that we recently introduced a BrainCap to LiveAmp adaptor. With this 50-pin connector, you can easily switch from recordings with the BrainAmp to mobile recordings with the LiveAmp (up to 64 channels), while still using the same electrode bundle. This handy little adaptor is the perfect compliment for those labs who are considering LiveAmp as an extension to their existing Brain Products setup.
New Talker available for actiCHamp Plus and Spike2 from Cambridge Electronic Design (CED)
If you are using Spike2 signal acquisition software from Cambridge Electronic Design (CED), you can now easily integrate EEG data from your actiCHamp Plus, as well. A talker is a program that allows data streams from arbitrary devices to be added into a data file as if they were all being sampled by the same interface. Our friends at Cambridge Electronic Design have programmed a freely downloadable talker, the “Brain Talker” for actiCHamp Plus and Spike2. To learn more about the talker, visit their website.
BrainVision Analyzer 2 Solution “Sleep Scoring”
A new version of the Sleep Scoring solution for the BrainVision Analyzer 2 is available as of now. It allows manual sleep scoring and adds sleep score specific markers to the dataset that can be used for further analysis. As for all our solutions it is completely free of charge and can be requested via firstname.lastname@example.org.
Downloads & Updates
Software/Firmware Releases and Updates
→ BrainVision Analyzer 2.2.1 (and corresponsing User Manual)
→ Dongle Driver 8.11 for BrainVision Analyzer 2.2.1
→ BrainVision Analyzer Solution “Wavelet Data Export”
→ BrainVision CapTrak 18.104.22.168 (and corresponding Operating Instructions)
→ Firmware Update (4.74) for LiveAmp
Misc. News & Updates
→ Latest Webinar Recordings posted on Webinar Channel
→ Tips on “How to get your BrainVision Analyzer 2 ready for home office”
©Brain Products GmbH 2020